- Your shopping cart is empty!
Have A Question For This Product?
Q: Can I just purchase some additional wastes and end caps or do I have to purchase the whole kit ? Can I just purchase some additional wastes and end caps or do I have to purchase the whole kit ?
A: All kits do come with enough end caps and wastes for each job, however you can purchase additional waste and end caps at any time.
Q: What type of silicon should I use? What type of silicon should I use?
A: We recommend using a neutral cure silicone. A neutral cure silicone is a sealant which releases alcohol or another non-acidic substance whilst curing.
Q: How can the grates be joined together to extend over a distance greater than 5.6m How can the grates be joined together to extend over a distance greater than 5.6m
A: Yes, the grates can easily be but joined together and secured with clear silicone. Position the top grate over the joint for a more continuous look.
Guidance For Choosing The Waste Size :
If you are installing shower grate for one shower head you will only need a 40mm waste . For a double shower (two shower heads) you will need a 50mm waste. If the water is of greater volume or a longer length is to be used around and outdoor living area or a pool ect, more than one outlet might be required.
Cutting & Assembly Instructions:
For easy cutting of floor grate, we recommend the use of a compound mitre saw fitted with a multi-material cutting blade 80 tooth or more. A compact drill with a bimetal hole would be adequate to drill the hole for the waste outlet.
1.Cut the bottom tray 3mm shorter than desired length to allow end caps to be fitted
2.Cut the top grate 1mm shorter than the bottom tray to allow for easy roll in of top grate and tidy fit
3.Using the suitable size hole saw for your pop waste, drill out the hole at the required position to align with the waste pipe in the floor
4.Insert the end caps into the bottom tray and secure with a bead of silicone on the inside of the tray
5.Place silicone around the lip of the pop waste and secure to the underside of the bottom tray at the recently drilled hole