Please Note: This item has NO CARTON BOX and PICK UP ONLY!

It takes at least 2 weeks for local customized.

Steam Stopper 45 Degree

The 45deg Steam Stopper is suitable for most 1m x 1m and 900mm x 900mm 45deg corner shower cubicles, many of these 45 deg showers are up to 20 years old but the Steam Stopper will still fit once you have trimmed the edges to suit.
 
Once you have installed the support brackets (as per instructions) you then need to trim your Steam Stopper to size, I would recommend trimming the back edges first, once the back edges are cut and fit parallel to your walls place the 45 Deg Steam Stopper on the top of the shower and mark around the front edge then cut 3 – 5mm inside your marks, fit the Steam Stopper and the the job is completed.

The Steam Stopper 45 Degree will:

• Stop Steam from being made in your shower
• Make your paint last longer
• Stop Mould from growing
• Reduce the cleaning of your bathroom
• Stop your mirror from misting
• Pealing Paint is a thing of the past
• Save power
• Save hot Water

Size:980 x 980mm Steam Stopper 45 Degree

*Please note* ALL 45deg Steam Stoppers will be supplied cut to 995mm x 995mm, (the dome as such is 810mm x 810mm) and the outer edges will need to be trimmed to size to suit your shower.  cutting instructions here.